技術

NXP ISP1504x1 ULPI收發器評估方案

2010-07-06 來源：微波射頻網 字號：大中小

NXP 公司的ISP1504x1是USB2.0收發器宏單元接口+低引腳接口(ULPI)OTG收發器,能以高速(480Mbps),全速(12Mbps)和低速(1.5Mbps)發送和接收USB數據,并提供最佳引腳,物理層前端附件到USB主設備,外設和OTG設備.因此非常適合用在手提電子設備如手機,數碼相機,數字視頻攝影機,PDA和數字音頻設備等.本文介紹了ISP1504x1系列的主要特性,方框圖, ISP1504x1和標準USB外設控制器應用電路, ISP1504x1和OTG控制器應用電路圖, ISP1504x1和標準USB主控制器應用電路圖以及ISP1504x1評估板UM10079方框圖,電路圖與材料清單(BOM).

The ISP1504A1; ISP1504C1 (ISP1504x1) is a Universal Serial Bus (USB) On-The-Go
(OTG) transceiver that is fully compliant with Universal Serial Bus Specification Rev. 2.0,
On-The-Go Supplement to the USB 2.0 Specification Rev. 1.2 and UTMI+ Low Pin
Interface (ULPI) Specification Rev. 1.1.
The ISP1504x1 can transmit and receive USB data at high-speed (480 Mbit/s), full-speed
(12 Mbit/s) and low-speed (1.5 Mbit/s), and provides a pin-optimized, physical layer
front-end attachment to the USB host, peripheral and OTG devices.
It is ideal for use in portable electronic devices, such as mobile phones, digital still
cameras, digital video cameras, Personal Digital Assistants (PDAs) and digital audio
players. It allows USB Application-Specific Integrated Circuits (ASICs), Programmable
Logic Devices (PLDs) and any system chip set to interface with the physical layer of the
USB through a 12-pin interface.
The ISP1504x1 can interface to devices with digital I/O voltages in the range of 1.65 V to
3.6 V. The ISP1504x1 is available in TFBGA36 package.

ISP1504x1主要特性:

Fully complies with:
Universal Serial Bus Specification Rev. 2.0
On-The-Go Supplement to the USB 2.0 Specification Rev. 1.2
UTMI+ Low Pin Interface (ULPI) Specification Rev 1.1
Interfaces to host, peripheral and OTG device cores; optimized for portable devices or
system ASICs with built-in USB OTG device core
Complete Hi-Speed USB physical front-end solution that supports high-speed
(480 Mbit/s), full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s)
Integrated 45 -10 % high-speed termination resistors, 1.5 k5 % full-speed
device pull-up resistor, and 15 k5 % host termination resistors
Integrated parallel-to-serial and serial-to-parallel converters to transmit and receive
USB clock and data recovery to receive USB data at 500 ppm
USB data synchronization from 60 MHz input to 480 MHz output during transmit
Insertion of stuff bits during transmit and discarding of stuff bits during receive
Non-Return-to-Zero Inverted (NRZI) encoding and decoding
Supports bus reset, suspend, resume and high-speed detection handshake (chirp)
Complete USB OTG physical front-end that supports Host Negotiation Protocol (HNP)
and Session Request Protocol (SRP)
ISP1504x1應用:
Digital still camera
Digital TV
Digital Versatile Disc (DVD) recorder
External storage device, for example:
Zip drive
Magneto-Optical (MO) drive
Optical drive: CD-ROM, CD-RW, CD-DVD
Mobile phone
MP3 player
PDA
Printer
Scanner
Set-Top Box (STB)
Video camera

圖1.ISP1504x1方框圖

圖2. ISP1504x1和標準USB外設控制器應用電路
Using the ISP1504x1 with a standard USB Peripheral Controller; external crystal

圖3. ISP1504x1和OTG控制器應用電路圖
Using the ISP1504x1 with an OTG Controller; external 5 V source with built-in FAULT and external square wave input on pin XTAL1

圖4.ISP1504x1和標準USB主控制器應用電路圖
Using the ISP1504x1 with a standard USB Host Controller; external 5 V source with built-in FAULT and external crystal
ISP1504x1 ULPI收發器評估板UM10079
UM10079:ISP1504A1; ISP1504C1 ULPI transceiver evaluation board, supporting Hi-Speed USB host, peripheral and OTG

The ISP1504A1; ISP1504C1 (ISP1504x1) is an 8-bit bidirectional UTMI+ Low Pin
Interface (ULPI) transceiver, which provides a Hi-Speed Universal Serial Bus (USB)
analog front-end solution to Application-Specific Integrated Circuits (ASICs) and Field
Programmable Gate Arrays (FPGAs) to implement as a Hi-Speed USB host, peripheral
or OTG device.
The ISP1504x1 evaluation (eval) board allows designers to evaluate the features of the
ISP1504x1, and conduct system-level validation and testing. The eval board interfaces to
the link through a 100-pin Transceiver and Macrocell Tester (T&MT) connector that
complies with USB 2.0 Transceiver and Macrocell Tester (T&MT) Interface Specification
Ver. 1.2.
ISP1504x1 ULPI收發器評估板UM10079功能:
The ISP1504x1 is fully compliant with Universal Serial Bus Specification Rev. 2.0,
UTMI+ Low Pin Interface (ULPI) Specification Rev. 1.1 and On-The-Go Supplement
to the USB 2.0 Specification Rev. 1.3.
The T&MT connector interface is fully compliant with USB 2.0 Transceiver and
Macrocell Tester (T&MT) Interface Specification Ver. 1.2.
The VBUS power must be supplied by the on-board power switch.
Adjustable VCC voltage when powered by the 5 V DC power supply.
Flexible clock source for the ISP1504x1: on-board crystal or square wave clock
driven into the XTAL1 input.
ISP1504A1; ISP1504C1 ULPI transceiver eval board